The LAUNCH X431 CRP919X BT emerges as a cutting-edge diagnostic scan tool, expertly engineered to meet the demands of modern vehicle repair, especially for General Motors (GM) vehicles. Building upon the legacy of LAUNCH diagnostics, the CRP919X BT is a powerhouse for both professional mechanics and advanced DIY enthusiasts seeking comprehensive bi-directional control and in-depth system analysis.
This 2023 edition, equipped with a robust Android 10.0 operating system and expanded 4+64GB memory, delivers unprecedented speed and efficiency in vehicle diagnostics. The wireless Bluetooth connectivity untethers you from cable constraints, providing freedom to move around the vehicle while the portable VCI module stays conveniently connected. As an evolution of the CRP919X, the CRP919X BT amplifies key functionalities with enhanced hardware, broadened repair capabilities, bi-directional control (active tests), extensive vehicle coverage encompassing over 20,000 models worldwide, and support for advanced protocols like DoIP and CAN FD.
Why the LAUNCH X431 CRP919X BT is Your Ideal Diagnostic Solution:
-
Bluetooth Wireless Freedom: Experience diagnostic agility with Bluetooth connectivity. Move freely around the vehicle, transmitting data rapidly without cable limitations. The VCI module’s portability enhances workflow in any repair environment.
-
Unmatched Diagnostic Power: The CRP919X BT is not just an upgrade; it’s a leap forward. It boasts superior hardware and software configurations, ensuring rapid and accurate diagnostics across vehicle systems.
-
ECU Coding for Advanced Customization and Repair: Unlock the full potential of your vehicle’s systems with advanced ECU coding capabilities. Customize vehicle functions, optimize performance, and integrate new components seamlessly.
-
Bi-Directional Control: Precision Diagnostics: Take command of your vehicle’s systems. Perform active tests to pinpoint component failures accurately without unnecessary disassembly. Verify system integrity with commands sent directly from the scanner.
-
Extensive Vehicle Coverage Including 2023 Models: Covering over 150 brands and hundreds of models globally, including the latest 2023 and some 2024 releases, the CRP919X BT ensures you’re equipped for a wide spectrum of diagnostic tasks. Enhanced with DoIP & CAN FD protocols, it’s ready for the newest vehicle communication architectures, particularly relevant for advanced GM models.
-
31+ Service Functions for Comprehensive Maintenance: From routine resets to complex system calibrations, the CRP919X BT offers an extensive suite of over 31 service functions, streamlining maintenance and repair processes.
-
One-Click Efficiency with AutoVIN & AutoScan: Maximize efficiency with AutoVIN technology for rapid vehicle identification and AutoScan for comprehensive system analysis, generating detailed diagnostic reports with a single touch.
Extended Capabilities through Module Expansion: Expand the CRP919X BT’s functionality with optional modules (purchased separately) to further enhance its diagnostic reach.
CRP919X BT User Manual and Quick Start Guide – Access detailed guidance for optimal tool utilization.
Bluetooth Wireless Diagnostic Tool: Speed and Convenience
The CRP919X BT’s Bluetooth capabilities are designed for efficiency. Transfer diagnostic data at speeds up to 3 Mbps, significantly faster than conventional tools. The wireless operation removes workspace clutter and enables real-time diagnostics from any point around the vehicle. The VCI connector features intuitive LED indicators (blue/red/green) for connection and charging status.
ECU Coding: Tailor Your Vehicle’s Performance and Features
The LAUNCH X431 CRP919X BT provides robust ECU coding features, including online coding for VW, Audi, Skoda, and Seat, and offline coding for a broad range of manufacturers like Volkswagen, Audi, Mercedes-Benz, BMW, Land Rover, Jaguar, Porsche, and Toyota.
-
ECU Online Coding: For supported brands like VW/Audi/Skoda/Seat, directly access OEM server data for accurate and efficient online coding processes. Customize vehicle functions such as acoustic confirmations, active rear spoilers, digital speedometer coding, and more.
-
Component Matching: When replacing components like actuators, ensure seamless integration by generating new codes and adapting replacement parts to the vehicle’s system. Follow on-screen prompts for straightforward procedures.
-
Personalization: Unlock hidden features and deactivate unwanted functionalities. Personalize vehicle settings on brands like Mercedes-Benz, BMW, and Porsche. Examples include deactivating start/stop functions, customizing lock/unlock beeps, and adjusting mirror folding behavior.
-
Variant Coding (Offline Programming): Adapt ECUs for different vehicle configurations, such as regional variants or mandatory feature activations like automatic headlights in specific regions. Compatible with brands like Nissan, Infiniti, and Hyundai.
-
Customize OE-Settings (Retrofit/Modification): Enhance vehicle capabilities and upgrade components such as fog lamps or batteries, modifying default settings to optimize performance and features.
Comprehensive Vehicle Diagnostics with LAUNCH CRP919X BT
The CRP919X BT empowers mechanics with ECU coding capabilities to manage component matching, calibrations, personalization, and customizations. Ideal for setting up new auto parts and tailoring vehicle configurations, this tool supports:
- Offline Coding: Transfer original module codes to new modules for brands like Ford and Mazda, with offline coding also available for Jaguar, Vauxhall, and Opel.
- Hidden Function Refresh: Activate or deactivate vehicle features like auto side mirror folding or engine start-stop functions to match user preferences.
- Adaptive Data Recoding: Ensure new ECU modules synchronize perfectly with existing systems post-repair.
- Complex Issue Resolution: Address ECU-related problems such as fuel inefficiency, power loss, and mechanical faults.
- Driving Experience Enhancement: Customize vehicle behavior, from activating beep sounds to adjusting lighting configurations and emergency braking signals.
Note: ECU Coding compatibility varies by vehicle. Verify compatibility by providing your VIN to [email protected]. ECU Programming is not supported.
OE-Level All System Diagnostics for In-Depth Analysis
The LAUNCH X431 CRP919X BT delivers OE-level diagnostics across all vehicle systems, including Engine (ECM), Transmission (TCM), ABS, SRS, EPB, BCM, EPS, HVAC, TPMS, and more. Perform comprehensive functions such as Read Codes, Clear Codes, Live Data streaming, Freeze Frame data retrieval, Evap Tests, and advanced tests like On-Board Monitor and O2 Sensor Tests. Gain access to ECU information, perform Matching & Adaptations, and utilize ECU Coding for a complete diagnostic overview.
Bi-Directional Control: Rapid Problem Isolation
The bi-directional capabilities of the LAUNCH CRP919X BT significantly reduce diagnostic time. Activate components on demand to test functionality directly. For example, command window operation to quickly assess window motor or regulator issues without disassembly. This functionality covers a wide range of tests across American, Asian, and European vehicles, making it indispensable for efficient diagnostics.
Key Bi-Directional Control Tests:
Perform active tests across subsystems including: device acceleration, vehicle level positioning, windows, doors, sunroof, wipers, radiator fan, mirrors, horn, A/C compressor, cooling fan, fuel system, and engine speed/throttle adjustments.
Benefits of Bi-Directional Scan Tools:
- Cost and Time Savings: Avoid unnecessary trips to workshops and perform diagnostics at your convenience.
- Comprehensive Module Testing: Go beyond reading OBD inputs by sending outputs to test modules like brakes, engine functions, transmission, door locks, battery health, and sensors.
- Efficient Fault Isolation: Quickly identify faulty components by directly commanding system operations, like testing fuel pump functionality to verify circuit and pump integrity.
Note: Bi-directional control function availability depends on vehicle make and model. Confirm compatibility by sending your VIN to [email protected].
FCA Vehicle AutoAuth Access
Secure Diagnostics for FCA Vehicles:
Utilize the AutoAuth software update for secure system diagnostics, active tests, module information retrieval, and ECU coding on FCA vehicles (Chrysler, Dodge, Jeep, Fiat) equipped with SGW from 2017 onwards. (AutoAuth subscription required and billed separately by AutoAuth.)
Compatible with FCA models from 2017-2023 including popular series like 300, Pacifica, Challenger, Charger, Durango, Ram, Cherokee, Wrangler, Giulia, Stelvio, and more. The coverage continues to expand.
Extensive Vehicle Brand Coverage
Broad Compatibility:
The CRP919X BT supports over 150 brands and 10,000+ vehicles from American, European, and Asian manufacturers (1996-2024), covering 12V cars, light-duty trucks, SUVs, and minivans.
- US, EUR, ASIA Models: Detailed lists of supported brands are provided in the original article, ensuring wide market coverage.
- Vehicle Coverage Check: Verify specific car model compatibility at https://qcar.x431.com/qcar/#/pc/index?q=eyJsYW4iOiIxMDAxIn0%3D.
31+ OE-Level Maintenance Functions
The LAUNCH CRP919X BT offers a comprehensive suite of over 31 maintenance and reset functions, including:
- ABS Bleeding
- TPMS Reset
- Oil Lamp Reset
- Throttle Sensor Reset
- Injector Coding
- SAS Reset
- Brake-pad Reset
- Gear Learning
- Battery Matching
- DPF Regeneration
- EGR Adaption
- Suspension Matching
- NOx Sensor Reset
- Tyre Reset
- Windows Calibration
- Stop-start Reset
- AC Initialization
- AdBlue Reset
- AFS Headlamp Reset
- A/F Reset
- Gearbox Reset
- Coolant Bleeding
- Transport Reset
- Seat Calibration
- High Voltage Battery Detection
- Sunroof Initialization
- Engine Power Balance Monitoring
- Language Change
- GPF Regeneration
- Intelligent Cruise Control System Reset
…and more.
(Note: Function availability varies by vehicle make, year, and model.)
Multi-Language Support
Operate the CRP919X BT in your preferred language with support for 11+ languages including English, Spanish, French, German, Russian, Italian, Portuguese, Japanese, Korean, Polish, and Traditional Chinese.
Enhanced Data Stream Display
Visualize up to 8 live data streams simultaneously, presented in color-coded graphs for easy analysis of abnormal parameters. Record and playback data streams for detailed diagnostics.
Smart Features for Efficiency
- AutoVIN + 8MP Camera: Quickly identify vehicles and document diagnostic findings with the integrated 8MP camera.
- Real-Time Battery Test: Monitor vehicle battery voltage during diagnostics.
- Health Report Generation: Create, save, and share diagnostic reports easily.
Expandable with Add-on Tools
- BST360 Battery Tester: Integrate with the LAUNCH BST360 for comprehensive battery and electrical system analysis.
- VSP600 Endoscope: Connect the LAUNCH VSP600 endoscope for visual inspections in hard-to-reach areas. (Both tools sold separately.)
Future-Proof with CAN FD & DoIP Protocol Support
The CRP919X BT is compatible with CAN FD and DoIP protocols, ensuring high-speed communication and readiness for newer vehicle models.
- CAN FD Protocol: Supports faster data rates and increased data capacity, essential for diagnosing advanced GM models from 2020 onwards, including Onix, Tracker, Cavalier, and various truck and SUV series.
- DoIP Protocol: (Requires optional DoIP connector) Enables diagnostics over TCP/IP and Ethernet, optimizing performance for complex tasks and flash memory applications on compatible vehicles like BMW (F&G chassis), Volvo (2018+), and Land Rover/Jaguar (2017+).
Package Contents:
The LAUNCH CRP 919X BT package includes all essential components for immediate use, detailed in the original article’s package list.
Contact Information:
Email: [email protected]
Whatsapp: +86 18186426016
Scan x431tool.com QR code to order anywhere and anytime by mobile phone
