Resetting the Tire Pressure Monitoring System (TPMS) on your 2014 Chevrolet Equinox after a tire rotation or sensor replacement is crucial for accurate tire pressure readings. While a scan tool simplifies the process, it’s possible to reset the TPMS without one. This guide outlines the manual relearn procedure for your 2014 Equinox.
Chevy Equinox Infographic
Understanding Your Equinox TPMS
The 2014 Chevrolet Equinox utilizes a direct TPMS, meaning each wheel has a sensor that transmits pressure data to the vehicle’s computer. When tire pressure drops significantly, a warning light illuminates on your dashboard. A TPMS reset is necessary to ensure the system recognizes the sensors in their new positions after a tire rotation or replacement.
Manual TPMS Reset Procedure for 2014 Chevrolet Equinox
The 2014 model year falls within the range using the following procedure:
-
Prepare Your Vehicle: Inflate all tires to the recommended pressure listed on the tire placard (usually located on the driver’s side doorjamb). Engage the parking brake and turn the ignition to the “ON” position.
-
Access TPMS Menu: Navigate to the “Vehicle Information” menu in the Driver Information Center (DIC) using the menu button on your steering wheel or center console. Select “Tire Pressure.”
-
Initiate Relearn: Press the “SET/CLR” button to begin the sensor relearn process. Confirm by selecting “YES” when prompted. The horn will chirp twice, and the DIC will display “TIRE LEARNING ACTIVE.”
-
Activate Sensors: You’ll need a TPMS activation tool (available at most auto parts stores) for this step. Starting with the driver’s side front tire, hold the tool against the tire sidewall near the valve stem until the horn chirps once. Repeat this process for the remaining tires in the following order: passenger-side front, passenger-side rear, and driver’s-side rear.
-
Confirm Completion: Once all four sensors have been successfully activated, the horn will chirp twice to confirm completion. Turn the ignition “OFF.”
Troubleshooting Tips
If the relearn process fails:
-
Time Sensitivity: Remember you have two minutes to match the first tire and five minutes total to complete the process. Restart the procedure if you exceed the time limit. Each activation should trigger a single horn chirp. Two chirps indicate a failed attempt.
-
Signal Interference: Lowering the driver’s side window can sometimes improve signal reception between the tool and the sensors, especially on larger vehicles.
-
Consult Owner’s Manual: Refer to your owner’s manual for specific instructions and troubleshooting advice related to your 2014 Equinox.
Tire Rotation and TPMS Reset
Chevrolet recommends tire rotations every 7,500 miles. After each rotation, resetting the TPMS system is crucial for accurate monitoring and optimal tire performance.
Conclusion
Resetting the TPMS on your 2014 Chevrolet Equinox without a scan tool is achievable with the manual relearn procedure. Following these steps ensures accurate tire pressure readings, contributing to safe and efficient driving. Remember to consult your owner’s manual for specific recommendations and troubleshooting tips.
