Programming a new key fob for your 2013 Chevy Silverado can be expensive at a dealership or locksmith. This guide provides a step-by-step process for programming a remote yourself using a Snap-on scan tool, saving you significant money. This process was successfully completed using a MODIS Edge tool, but may work with other compatible scanners.
Programming Your 2013 Silverado Key Fob: Step-by-Step Instructions
Before you begin, you’ll need a new transponder key and remote. These can be purchased online at retailers like Amazon or eBay. You’ll also need to have the key cut at a locksmith or hardware store.
Once you have your key cut and your scan tool ready, follow these steps:
Step 1: Vehicle Identification and System Selection
- Turn on your Snap-on scan tool.
- Select “Scanner” from the main menu.
- Identify your vehicle by entering the Year, Make, Model, and VIN. This ensures the tool selects the correct programming parameters for your specific 2013 Silverado.
- Choose the “Keyless Entry” system. This will direct the scan tool to the module responsible for key fob programming.
Step 2: Module Setup and Key Fob Programming
- Select “Module Setup” from the Keyless Entry menu.
- Choose the “Program Key Fobs” option.
Step 3: Programming Options and Key Slot Selection
- Carefully review the on-screen instructions provided by the scan tool. These instructions will outline important safety precautions and specific procedures for your 2013 Silverado.
- Select “Continue” to proceed with the programming process.
- Choose the programming option that best suits your needs: “Erase all and program,” “Program to an empty slot,” etc. For this example, we’ll use “Next open slot.” This option adds a new key fob without affecting existing ones.
- Scroll through the available key fob slots and select an empty one (e.g., #3).
Step 4: Programming Confirmation and Completion
- Press “Y” on the “Program” option at the top of the screen to confirm your selection.
- Press “Y” on “Program” again, then simultaneously press and hold the “LOCK” and “UNLOCK” buttons on your new key fob. Continue holding these buttons until “YES” is displayed at the end of the chosen slot on the scan tool screen. This confirms successful programming.
- Exit the programming menu on the scan tool.
Step 5: Verification
Test all the functions of your newly programmed remote, including locking, unlocking, and panic features.
Conclusion
Programming your 2013 Silverado key fob with a scan tool is a straightforward process that can save you time and money. By following these steps, you can successfully program a new remote yourself. Remember to consult your vehicle’s owner’s manual for specific instructions and safety precautions.
