The Craftsman CanOBD2 1 scan tool is a valuable tool for diagnosing car problems. This quick guide provides abbreviated procedures for retrieving codes, viewing results, and performing additional tests. For the complete owner’s manual, please visit www.craftsman.com.
Retrieving Diagnostic Trouble Codes (DTCs)
- Connection: Connect the scan tool to the vehicle’s OBD-II port. This is typically located under the dashboard on the driver’s side.
- Ignition: Turn the ignition key to the “On” position. Do not start the engine.
- Linking: The scan tool will automatically establish communication with the vehicle’s onboard computer. This may take a few moments.
Viewing Results: Codes, Freeze Frame Data, and System Status
The Craftsman CanOBD2 1 displays retrieved DTCs, Freeze Frame data (a snapshot of vehicle conditions when a fault occurred), and the vehicle’s System Status.
- Display Screen: Codes, I/M Monitor Status (emissions readiness), and Freeze Frame data are shown on the scan tool’s screen.
- LED Indicators: System Status is indicated by LED lights on the tool.
- Multiple Codes: If more than one DTC is retrieved, use the DTC/FF button to cycle through them. Pressing this button will also display Freeze Frame Data after the corresponding code, if available.
- Long Code Definitions: Utilize the UP and DOWN buttons to scroll through lengthy code definitions or Freeze Frame data.
Accessing OEM Enhanced DTCs
For supported vehicles (most Chrysler/Jeep, Ford/Mazda, GM/Isuzu, Honda/Acura, and Toyota/Lexus), the CanOBD2 1 can access OEM Enhanced DTCs, ABS (Anti-lock Brake System) DTCs, and SRS (Supplemental Restraint System) DTCs. Press the SYSTEM button to enter OEM Enhanced mode.
Performing Additional System Tests
- Main Menu: Press the M button to access the Main Menu.
- System Tests: Navigate to “System Tests” using the UP and DOWN buttons and press ENTER.
- Test Selection: Choose the desired test (e.g., O2 Sensor Test, OBD Monitor Test, EVAP Test) from the System Test Menu using the UP and DOWN buttons and press ENTER. This allows for more in-depth diagnostics.
Viewing Vehicle Information
- Main Menu: Access the Main Menu by pressing the M button.
- Vehicle Info: Select “Vehicle Info” using the navigational buttons and press ENTER. This displays stored vehicle information from the onboard computer, such as VIN and other parameters.
This quick start guide offers a basic overview of the Craftsman CanOBD2 1 scan tool. Consult the full manual at www.craftsman.com for detailed instructions, troubleshooting tips, and comprehensive code definitions. Understanding and using this tool properly can help you diagnose and address vehicle issues effectively.
