The 2010 Audi Q5 is a fantastic vehicle, but with a few VCDS (VAG-COM Diagnostic System) modifications, you can unlock hidden features and customize your driving experience even further. This guide outlines several popular VCDS tweaks for your 2010 Audi Q5. Before making any changes, it’s crucial to back up your existing settings.
Popular 2010 Audi Q5 VCDS Mods
Enable Video In Motion
This mod allows passengers to watch videos while the car is in motion.
- Module: 5F
- Access: Advanced ID > Note 1st serial number. Then, Security Access > Enter digits 6/13/10/14/11 of the serial number.
- Adaptation: Channel 48 (Change value from 0 to 255)
- Restart MMI: Press MENU + BIG KNOB + TOP RIGHT soft button together.
Enable Hidden Green Menu
Access diagnostic and troubleshooting information with the hidden green menu.
- Module: 5F
- Adaptation: Channel 6 (Change value from 0 to 1)
Disable Seat Belt Chime
- Module: 17
- Coding: Long Coding Helper > Deactivate Seat Belt Warning
Enable Alarm Arming/Disarming Tone
Add an audible confirmation when arming and disarming your alarm system.
- Module: 46
- Coding: Byte 1, Bit 2 (Enable)
- Adaptation (for double disarm tone): Channel 63 (Change value from 40 to 44)
Enable Switchable DRLs in MMI
Control your daytime running lights (DRLs) through the MMI interface.
- Module: 09
- Coding: Byte 3, Bit 0 (Enable)
Enable Lap Timer in DIS
Utilize a built-in lap timer for performance tracking.
- Module: 17
- Coding: Byte 1, Bit 3 (Enable)
Enable Stop/Start Memory
Retain the last Stop/Start system setting (on or off) after restarting the vehicle.
- Module: 09
- Security Access: Then Adaptation > Channel 34 (Change value from 28 to 60)
- -4 Disables
- +32 Remembers last state
- +64 Reverse light behavior
Enable Taillights with DRLs
Enhance visibility by activating your taillights along with your DRLs. This includes the number plate lights.
- Module: 09
- Coding: Byte 2, Bit 7 (Enable)
Enable/Disable Cornering Fog Lights
Activate or deactivate your fog lights when turning.
- Enable: Module 09 > Coding > Byte 4, Bit 0 (Check)
- Disable Come Home Function: Module 09 > Coding > Byte 6, Bit 5 (Uncheck)
Disable Automatic Rear Wiper in Reverse
Prevent the rear wiper from automatically activating when reversing.
- Module: 09
- Security Access: Then Adaptation > Channel 19 (Change from 1 to 0)
Conclusion
These VCDS modifications allow you to personalize your 2010 Audi Q5 and enhance its functionality. Remember, modifying your vehicle’s settings can void warranties if not performed correctly. Always proceed with caution and consult a professional if you are unsure about any procedure. Enjoy exploring the hidden potential of your Audi Q5!
