The Audi A6 C7 is a sophisticated machine, but with a few tweaks using VCDS (VAG-COM Diagnostic System), you can unlock hidden features and customize your driving experience. This guide compiles a comprehensive list of VCDS mods for the A6 C7, ranging from simple convenience tweaks to more advanced modifications. Proceed with caution and at your own risk. We are not responsible for any damage caused by improper coding.
Popular A6 C7 VCDS Mods: A Comprehensive Guide
This compilation of modifications covers a wide range of functionalities, allowing you to personalize your A6 C7 to better suit your needs and preferences. Remember to always back up your original coding before making any changes.
Instrument Cluster Enhancements
- Gauge Test/Needle Sweep: Activate a dramatic needle sweep across your speedometer and tachometer upon starting the engine. This is often activated by default. (Module 17 – Instruments, Coding – 07, Byte 1)
- Lap Timer: Enable the lap timer functionality within your instrument cluster. (Module 17 – Instruments, Coding – 07, Byte 1) Note: May require a firmware update.
- Disable Seatbelt Chime: Silence the persistent seatbelt reminder chime. (Module 17 – Instruments, Coding – 07, Byte 0, Bit 4)
Lighting Modifications
- Cornering Lights (Kerb Lighting): Utilize the all-weather lights to illuminate the road when turning at low speeds. (Module 09 – Central Electrics, Coding – 07, Byte 4, Bit 0)
- Tail Lights with DRLs: Activate your tail lights along with your daytime running lights for increased visibility. (Module 09 – Central Electrics, Coding – 07, Byte 2, Bit 7)
- Disable DRL Dim on Turn Signal: Prevent your DRLs from dimming when using your turn signals. (Module 09 – Central Electrics, Security Access – 16 (Code: 20113), Adaptation – 10, Channel 3, Value: 5-100)
- Tourist Mode for Headlights: Enable a setting in the MMI to adjust your headlights for driving in countries with different traffic regulations. (Module 09 – Central Electrics, Coding – 07, Byte 4, Bit 6)
- Adjust LED Brightness: Fine-tune the brightness of your LED lights. (Module 09 – Central Electrics, Security Access – 16 (Code: 20113), Adaptation – 10, Channel 3, Value: 5-100)
- Footwell Lighting Activation: Enable and control footwell lighting through the MMI even without the factory lighting package. (Module 09 – Central Electrics, Coding – 07, Byte 16, Bit 6, and Hidden Menu: Car > Cardevicelist > Interior Light, then Carmenuoperation > Interior Light, set value to 5)
Convenience and Functionality Tweaks
- Beep on Lock: Enable an audible confirmation chirp from the alarm when locking your vehicle. (Module 46 – Central Convenience, Coding – 07, Byte 1, Bit 2)
- Disable Engine Stop on Door Open: Prevent the engine from shutting off when opening the driver’s door after moving the car a short distance. (Module 46 – Central Convenience, Coding – 07, Change Binary Code in Red Byte from 00000111 to 00001111)
- Enable Default Distance Setting for ACC: Access settings in the MMI to adjust the default following distance for Adaptive Cruise Control. (Module 13 – Auto Distance Regulation, Adaptation – 10, Channel 07, Change Value from 0 to 1)
- Modify High Beam Assist Speed Threshold: Adjust the speed at which High Beam Assist activates. (Module 20 – High Beam Assist, Adaptation – 10, Select “High Beam Speed Threshold” and enter desired speed in km/h)
Advanced Modifications
- Hidden Green Menu Access: Unlock the hidden green engineering menu in the MMI for access to advanced settings. ( Module 5F – Information Electr., Adaptation – 10, Channel 6, Change Value from 0 to 1. Access by holding CAR and MENU buttons simultaneously.) Use extreme caution when modifying settings in the hidden menu.
- Video in Motion (VIM): Enable video playback on the MMI screen while the car is in motion (consult external resources for detailed instructions and potential regional restrictions). (Module 5F – Information Electr.)
- Passenger Mirror Dip in Reverse: Automatically dip the passenger side mirror when reversing. (Module 52 – Door Elect, Pass, Coding – 07, Byte 4, Bit 2)
- Auto Handbrake in Park: Engage the electronic parking brake automatically when shifting into Park. (Module 53 – Parking Brake, Security Access – 16, Adaptation – 10, “Shift P to EPB”) Note: May cause errors on some models.
Conclusion
These VCDS mods offer a significant level of personalization for your Audi A6 C7. Remember to thoroughly research each modification and proceed cautiously, backing up your original coding before implementing any changes. While these modifications can enhance your driving experience, it’s crucial to understand the potential risks involved. Enjoy exploring the hidden potential of your A6 C7!
