After installing an aftermarket cruise control system in a Golf Mk6 (petrol), many owners seek to enable the cruise control speed display on the instrument cluster using VCDS. This feature, standard on some models, shows the set cruise control speed in the corner of the display. This article explores the possibility of activating the cruise control display using VCDS.
While some Golf Mk6 models display the set cruise control speed by default, it’s unclear whether this functionality can be universally activated through VCDS coding. Success might depend on the specific vehicle’s control modules and installed equipment. Forum discussions suggest varying outcomes, with some users reporting success and others encountering limitations. The vehicle in question, a petrol Golf Mk6, underwent a full VCDS scan, the results of which are detailed below. Analyzing this scan might provide clues regarding the feasibility of activating the cruise control display.
Saturday,22,June,2024,13:35:21:35137 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version: 24.5.0.0 (x64) HEX-V2 CB: 0.4643.4 Data version: 20240429 DS355.0 www.Ross-Tech.com VIN: WVWZZZ1KZ9W502804 License Plate: Chassis Type: 1K-VW36 (1K0) Scan: 01 03 08 09 10 15 16 17 19 25 37 42 44 46 4C 52 56 62 72 VIN: WVWZZZ1KZ9W502804 Mileage: 292180km-181552miles 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: Malfunction 0010 04-Steering Angle -- Status: OK 0000 08-Auto HVAC -- Status: OK 0000 09-Cent. Elect. -- Status: OK 0000 10-Park/Steer Assist -- Status: OK 0000 15-Airbags -- Status: OK 0000 16-Steering wheel -- Status: OK 0000 17-Instruments -- Status: OK 0000 19-CAN Gateway -- Status: OK 0000 25-Immobilizer -- Status: OK 0000 37-Navigation -- Status: Malfunction 0010 42-Door Elect, Driver -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 46-Central Conv. -- Status: OK 0000 4C-Tire Pressure II -- Status: OK 0000 52-Door Elect, Pass. -- Status: OK 0000 56-Radio -- Status: OK 0000 62-Door, Rear Left -- Status: OK 0000 72-Door, Rear Right -- Status: OK 0000 ...(rest of the scan)...The VCDS scan reveals relevant module information, including part numbers and coding for the engine (01), ABS brakes (03), and instruments (17). Further investigation within these modules, particularly module 17 (Instruments), might reveal coding options related to the cruise control display (Cruise Control Display Vcds). However, without specific coding instructions for activating this feature in a Golf Mk6 with an aftermarket cruise control system, success is not guaranteed. Consulting Ross-Tech’s official documentation or seeking guidance from experienced VCDS users specializing in Golf Mk6 modifications is recommended before attempting any coding changes. Improper coding can lead to unintended consequences and potentially damage vehicle systems.
