The Vgate iCar Pro is a sophisticated OBD2 Bluetooth scan tool leveraging ELM327 v2.3 technology. This comprehensive manual provides detailed information on its features, functionality, and connection procedures for both Android and iOS devices. Learn how to harness the power of this advanced diagnostic tool for comprehensive vehicle analysis and troubleshooting.
Understanding the Vgate iCar Pro’s Capabilities
The iCar Pro boasts a wide array of features, empowering users to delve deep into their vehicle’s diagnostics:
- Read and Clear Diagnostic Trouble Codes (DTCs): Access both generic and manufacturer-specific codes, with over 3000 generic code definitions in the database. Clear codes and turn off the “Check Engine” light (MIL).
- Real-Time Data Monitoring: Monitor crucial engine parameters including RPM, calculated load value, coolant temperature, fuel system status, vehicle speed, short and long term fuel trim, intake manifold pressure, timing advance, intake air temperature, air flow rate, absolute throttle position, oxygen sensor voltages, and fuel pressure.
Connecting the Vgate iCar Pro: A Step-by-Step Guide
The iCar Pro supports multiple connection methods: Bluetooth 3.0 and 4.0 for Android, Bluetooth 4.0 for iOS, and WiFi for both Android and iOS.
Connecting to iOS Devices:
- Enable Bluetooth on your iOS device.
- Important: Do NOT pair the device directly through the Bluetooth settings menu. Instead, configure the Bluetooth device name (usually IOS-VLINK) within your chosen OBD app settings.
Connecting to Android Devices:
- Enable Bluetooth on your Android device.
- Two Bluetooth names may appear: IOS-VLINK and ANDROID-VLINK. Connect only to ANDROID-VLINK.
- Alternatively, connect via WiFi following the instructions in your chosen OBD app.
OBD-II Protocol Compatibility
The Vgate iCar Pro is compatible with all standard OBD-II protocols, ensuring seamless communication with a wide range of vehicles:
- SAE J1850 PWM (41.6 Kbaud)
- SAE J1850 VPW (10.4 Kbaud)
- ISO9141-2 (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
- ISO14230-4 KWP (fast init, 10.4 Kbaud)
- ISO15765-4 CAN (11bit ID, 500 Kbaud)
- ISO15765-4 CAN (29bit ID, 500 Kbaud)
- ISO15765-4 CAN (11bit ID, 250 Kbaud)
- ISO15765-4 CAN (29bit ID, 250 Kbaud)
- SAE J1939 CAN (29bit ID, 250 Kbaud)
- USER1 CAN (11 bit ID, 125 Kbaud)
- USER2 CAN (11 bit ID, 50 kbaud)
Additional Features
- Low Energy Consumption: The iCar Pro automatically enters sleep mode 30 minutes after the engine is off, preventing battery drain.
- Automatic Start/Sleep: The device automatically starts when the car is ignited and sleeps 30 minutes after the engine stalls. (Note: This feature is not supported by electric vehicles.)
- Firmware Updates: Supports online firmware updates to ensure optimal performance. (Note: Pirated products cannot be updated.)
Package Contents
The Vgate iCar Pro package includes:
- 1 x Vgate iCar Pro BLE4.0 OBDII adapter
- 1 x User Manual
