The Audi RNS 850 navigation system offers a wealth of features, but video playback while driving is often restricted for safety reasons. This guide explores how to enable Video In Motion (VIM) on your RNS 850 using VCDS (Vag-Com Diagnostic System), allowing passengers to enjoy videos on the go. We’ll delve into the specific adaptation channels and security access codes needed to unlock this feature.
Enabling VIM on Your Audi RNS 850 with VCDS
Before proceeding, remember that enabling VIM might be illegal in your region. Always prioritize safety and comply with local traffic laws. This modification is intended for off-road use or for passenger entertainment only. The driver should never watch videos while operating the vehicle.
Here’s a step-by-step guide on how to enable VIM on your RNS 850 using VCDS:
1. Obtain Your VIM Code
You’ll need a five-digit unlock code specific to your RNS 850 unit. This code is derived from your unit’s serial number.
-
Find Your Serial Number: Access the “5F – Information Electr.” module in VCDS. Your serial number is located within this module’s data.
-
Generate Your Code: Several online VIM code generators are available. Enter your serial number, specifically digits 6, 13, 10, 14, and 11 (replace “-” with “0” if present). The generator will provide the necessary five-digit code.
2. Accessing the RNS 850 Module with VCDS
-
Connect VCDS: Connect your VCDS interface to your vehicle’s OBD-II port and launch the software.
-
Select Control Module: Navigate to “5F – Information Electr.”
-
Enter Security Access Code: Go to “Security Access – 16.” Enter the security access code “02002” for the RNS850. Once accepted, proceed to the next step. If this code does not work, consult your VCDS documentation for the correct code for your specific RNS 850 unit.
3. Modifying Adaptation Channels
-
Enter Adaptation: Go to “Adaptation – 10.”
-
Channel 48: Locate Channel 48 and change its value to 255.
-
Save Changes: Save the changes and exit the adaptation menu.
4. Reboot the RNS 850
- Reboot Procedure: Reboot the RNS 850 by simultaneously pressing and holding the following buttons: Phone + Climate + Nav + Traffic + Central Knob.
Verification and Considerations
After rebooting, the VIM restriction should be lifted. Test by playing a video while the vehicle is in motion (with the parking brake engaged for initial testing).
Remember that enabling VIM solely rests on the user’s responsibility. Ensure adherence to local traffic laws and prioritize safe driving practices. This modification should never distract the driver.
This guide provides a general overview. Specific procedures may vary slightly depending on your RNS 850 software version and vehicle model year. Consulting your VCDS documentation and online forums dedicated to your specific Audi model is recommended for the most accurate information. Always proceed cautiously when modifying vehicle systems.
