Tired of your Tiguan 2’s auto start-stop system constantly engaging? Want a permanent solution without complex VCDS coding? This guide details a simple, plug-and-play device that remembers your last start-stop setting, effectively disabling the system for good. No more fumbling with the button every time you start your car!
Bypass the Start-Stop Button: A Plug-and-Play Solution
This affordable device from AliExpress offers a hassle-free way to permanently disable the auto start-stop feature on your VW Tiguan 2 (make sure to select the “for new Tiguan” option when ordering). While shipping times may vary, the simple installation makes it well worth the wait. This guide provides a step-by-step walkthrough for a seamless installation process.
Installation Guide: Disabling Start-Stop on Your Tiguan 2
The installation process requires minimal tools and technical expertise. Follow these steps to disable your Tiguan 2’s start-stop system:
Step 1: Accessing the Button Panel
Using the included orange pry tool, carefully pop up the shifter dust cover. Start at the front corner and gently pry upwards. Avoid pulling on the leather, as it’s glued and could tear. Once loose, lift the cover over the shift knob.
Step 2: Removing the Buttons
With the pry tool, gently release the button panel from its mount. This is a single unit containing all three buttons and the blank space.
Step 3: Disconnecting the Connector
Locate the clip on the connector (as shown in the image below) and press down to release it. Carefully disconnect the button panel.
Step 4: Installing the Device
Connect the new device between the connector from the dash and the buttons. The connectors are keyed, so they only fit one way. Avoid forcing them. For optimal fit, connect the device to the dash and tuck it under the cross braces beneath the button panel.
Step 5: Reassembly
Reconnect the buttons, ensuring they click into place. Reinstall the shifter boot cover, starting with the hooks at the bottom of the bracket.
Step 6: Finalizing the Installation
To activate the device, open and close the driver’s door, set the alarm, unlock the car, and then start the engine. After this cycle, the auto start-stop system should be permanently disabled. Enjoy a smoother and more controlled driving experience!
