VCDS Audi Coding: Unlocking Hidden Features in Your Audi

Vcds Audi Coding allows you to customize your Audi’s features and functionalities beyond the factory settings. Using a VCDS (VAG-COM Diagnostic System) interface, you can access and modify the control modules in your Audi, enabling hidden features, tweaking existing ones, and personalizing your driving experience. This guide provides a comprehensive list of popular VCDS coding modifications specifically for Audi A4/S4 B8 models.

Popular VCDS Audi Coding Modifications

This compilation gathers information from various online sources, including Audizine and AudiEnthusiasts, providing a centralized resource for Audi S4 owners. Remember, this information is for educational purposes, and you are responsible for any modifications made to your vehicle.

Lighting

Disable After-wipe of Windscreen Wipers: [09 – Cent. Elect.] [Coding – 07] -> [Dropdown] -> “x 8K1 955 119 WWS xxxx” -> Long Coding Helper -> Byte 1 Bit 3 – Uncheck (1 = active)
Disable Amber Corner Lights: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10 Submodule 0 Bit 3 – Set to 0
Disable Amber Side Markers: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10 Submodule 0 Bit 3 – Set to 0
Disable LED ‘Wink’ on Turn Signal: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 2 – Uncheck for full brightness with parking lights (1 = active); Bit 7 – Uncheck to disable DRL dimming with indicators (1 = active)
Enable DRL: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 1 = DRL via Front Side markers; Bit 2 = DRL via High Beams; Bit 3 = DRL via Fogs; Bit 4 = DRL via LEDs; Bit 6 = DRL via Side markers; Bit 7 = DRL via Tail lights
Enable Euro Parking Lights: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 9 Bit 0 – Set to 1
Enable Fog Lamp with Turn Signal: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 0 – Set to 1
Enable Front Turn Signals as Parking Lights: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10 Bit 0 – Set to 1; then, [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 6 – Set to 1 to enable as DRLs.
Enable Independent Fogs with High Beams: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 1 – Set to 0 (Front); Bit 2 – Set to 0 (Rear)
Enable Rear Tail Lights with DRLs: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2 Bit 7 – Set to 1 (Active)
Adjust LED Brightness:[09 – Cent. Elect.] [Security Access – 16] (e.g., 20113) [Adaptation – 10] -> Channel 3 Set between 5 and 100

Convenience

Disable Key Warning (Keyless Models): [46 – Central Conv.] [Coding – 07] -> Long Coding Helper -> Byte 9 Bit 7 – Set to 0
Disable “Lights On” Warning: [09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 5 Bit 3 – Set to 0
Disable NAV & Phone Warnings While Driving: [5F – Information Electr.] -> Adaptation -> Set Channel 2 & 3 to 250
Disable Seatbelt Chime: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 0 Bit 2-4 – Set to inactive
Enable Adaptive Brake Lights: [46 – Comfort System] [Coding – 07] -> Long Coding Helper -> Byte 8 Bit 0 – Set to 1 (Turn Lights active); Bit 1 – Set to 1 (Brake Lights active)
Enable Ambient Interior Lighting Control: [Hidden menu] [car] [carmenuoperation] [interior light] Set to 5; [Hidden menu] [car] [cardevicelist] [interior light] Enable
Enable Automatic Hill Hold Assist ‘Lite’: [03 – ABS brakes][Security Access – 16] (Enter code) [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 6 – Set to 1
Enable Release Parking Brake without Foot on Brake: [53 – Parking Brake][Security Access – 16] (Enter code) [Adaptation – 10] -> Channel 4 – Set to 0
Enable Release Parking Brake without Seatbelt: [53 – Parking Brake][Security Access – 16] (Enter code) [Adaptation – 10] -> Channel 7 – Set to 0
Enable Remote Operation Windows & Sunroof: [46 – Cent. Conv.] [Coding – 07] -> [Long Coding Helper] Byte 2 Bit 2 – Set to 1
Enable Reverse Mirror Tilt: [52 Door Elect, Pass.] -> [Coding – 07] -> [Long Coding Helper] -> Byte 4 Bit 4 and Bit 2 – Set to 1

Display and Instrumentation

Enable Automatic Gear Selection Display in DIS: [02 – Auto Trans] [Adaptation – 10] Select “Single Gear Display”; Select “D on/S on”
Enable Battery Meter: [Hidden menu] [car] [cardevextdevicelist] [Battery] Enable; [Hidden menu] [car] [carmenuoperation] [Battery] Set to 5; or [56 – Radio] -> Adaption -> Channel 39, add 16
Enable DIS with Efficiency Program: [17 – Instruments] [Adaptation – 10] -> Channel 77 – Change 0 to 255 (MY2010+)
Enable Double Disarm Beep: [46 – Central Conv.] [Adaptation – 10] -> Channel 63 – Add 4
Enable DRL Selectable via MMI: [09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3 Bit 5 – Set to 1
Enable Gauge Test/Needle Sweep: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 0 – Check “Gauge Test/Needle Sweep active”
Enable Hidden Menu in MMI: [5F – Information Electr.] [Adaptation – 10] -> Channel 6 – Change 0 to 1 (Use with caution)
Enable Lap Timer: [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 3 – Check “Lap Timer active”
Enable Speed Through MMI: [56 – Radio] [Adaptation – 10] -> Channel 02, Set to 1 (Not for NAV equipped vehicles)
Enable TPMS: Requires 1AT ABS unit; [Hidden menu] [car] [cardevicelist] [RDK] Enable; [Hidden menu] [car] [carmenuoperation] [Tires Air Pressure Control] Set to 5; [03 – ABS Brakes] [Security Access – 16] (e.g., 61378) [Coding – 07] -> Long Coding Helper -> Byte 1 Bit 3 – Set to 1; [17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 4 Bit 0 – Set to 1; Reset MMI
Enable VIM on MMI: [5F – Information Electr.] [Advanced ID – 1A] Note 1st Serial number; [Security Access] Enter Digits 6, 13, 10, 14, 11 of serial; [Adaptation – 10] -> Channel 48 – Set to 255; Reset MMI
Adjust Consumption in DIS: [17 – Instruments] [Adaptation – 10] -> Channel 3 – Change 100 to calculated value

Other Modifications

Set Audi Parking System – Switch OFF Speed: [10 – Park/Steer Assist] [Adaptation – 10] -> Channel 23 Set to 20 (km/h)
Set Custom ADS Settings: [09 – Cent. Elect.][Security Access – 16] [Adaptation – 10] -> Channels 63-66 – Set to 01 (Comfort), 02 (Auto), 03 (Dynamic), or 04 (Individual). All four channels must have the same value.
Set Headlight Washer Duration: [09 – Cent. Elect.] [Security Access – 16] [Adaptation – 10] -> Channel 6 – Change to desired value (e.g., 500)
Set Headlight Washer Cycles: [09 – Cent. Elect.] [Security Access – 16] [Adaptation – 10] -> Channel 26 – Change to desired value (e.g., 10)
Set Automatic Transmission Start Mode: [09 – Cent. Elect.] [Security Access – 10] [Adaptation 10] -> Channel 64 – 00 (Determined by ADS), 03 (Always S), 11 (S except Comfort – D), 19 (S except Auto – D)

This list provides a starting point for exploring the potential of VCDS Audi coding. Remember to consult reputable sources and proceed with caution when modifying your vehicle’s settings. Always back up your original coding before making any changes.