VCDS D2 S8 Convenience Entry: Tweaks and Hidden Features

The Audi D2 S8, a pinnacle of luxury and performance, offers a wealth of hidden features and customizable options accessible through VCDS (VAG-COM Diagnostic System). This guide delves into various VCDS tweaks specifically for the D2 S8, focusing on convenience entry and other enhancements to elevate your driving experience. These modifications range from subtle adjustments to unlocking hidden functionalities, allowing you to personalize your S8.

VCDS Tweaks for D2 S8: Unlocking Hidden Potential

Using VCDS, you can tailor your D2 S8 to your preferences. Here’s a comprehensive list of modifications, each detailing the specific module, coding, and adaptation channels required:

Lighting Modifications

Disable Amber Corner Lights: Navigate to Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 10 Submodule 0 Bit 3. Set to 0 to disable the amber side markers (applicable to US models). This modification provides a cleaner, more modern aesthetic to the front lighting.
Enable Euro Parking Lights: Within Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 9 Bit 0, set the value to 1. This activates the European-style parking light configuration, utilizing the turn signals.
Enable Front Turn Signals as Parking Lights: In Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 10 Bit 0, change the value to 1. This modification allows the front turn signals to function as parking lights.
DRL Customization: Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 2 allows customization of Daytime Running Lights (DRLs). Configure DRLs to incorporate front side markers (Bit 1), high beams (Bit 2), fog lights (Bit 3), LEDs (Bit 4), side markers (Bit 6), and tail lights (Bit 7).
Independent Fog Light Control with High Beams: Access Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 4. Uncheck Bit 1 (Front) and Bit 2 (Rear) to enable independent control of fog lights even when high beams are activated.
Adjust LED Brightness: For adjusting LED brightness, enter Security Access – 16 in Module 09 – Cent. Elect. (a default code is 20113). Then, in Adaptation – 10, adjust Channel 3 to a value between 5 and 100.
Coming/Leaving Home Lighting: Module 09 – Cent. Elect. offers extensive control over the Coming Home/Leaving Home lighting function. Use Security Access – 16 (default code might be 20113). Customize duration (Channel 43), activation threshold (Channel 37), and enable/disable the feature (Channel 46 for Leaving Home, Byte 6 Bit 1 and 2 in Long Coding Helper for both).

Convenience and Comfort Features

Disable Key Warning: Silence the key warning chime by navigating to Module 46 – Central Conv., Coding – 07, Long Coding Helper, Byte 9 Bit 7 and setting it to 0.
Disable “Lights On” Warning: Deactivate the “lights are on” warning chime when opening the door. Go to Module 09 – Cent. Elect., Coding – 07, Long Coding Helper, Byte 5 Bit 3 and set to 0.
Disable Seatbelt Chime: Deactivate the seatbelt chime through Module 17 – Instruments, Coding – 07, Long Coding Helper, Byte 0 Bit 2-4. Please note that disabling safety features like seatbelt chimes is not recommended..
Remote Window/Sunroof Operation: Enable remote control of windows and sunroof via Module 46 – Cent. Conv., Coding – 07, Long Coding Helper, Byte 2 Bit 2 (set to 1). This allows you to open and close windows and the sunroof using your key fob. This feature enhances ventilation and temperature control before entering the vehicle.
Double Disarm Beep: Add an audible confirmation when disarming the alarm. In Module 46 – Central Conv., Adaptation – 10, Channel 63, add 4 to the existing value.
Auto Locking/Unlocking: Configure automatic locking and unlocking settings in Module 46 – Central Conv., Coding – 07, Long Code Helper, Byte 5. Bit 4 controls Auto Lock and Bit 5 controls Auto Unlock (0=off, 1=on).

Other Notable Adjustments

Disable After-wipe of Windscreen Wipers: Deactivate the after-wipe function of the windshield wipers in Module 09 – Cent. Elect., Coding – 07, Byte 1 Bit 3 by removing the checkmark (1 = active).
Adjust Date Display Format: Modify the date format displayed on the instrument cluster via Module 17 – Instruments, Coding – 07, Long Code Helper, Byte 7.
Enable Gauge Test/Needle Sweep: Activate the gauge test/needle sweep function (often referred to as “staging”) within Module 17 – Instruments, Coding – 07, Long Coding Helper, Byte 1 Bit 0.
Reverse Mirror Tilt: Enable automatic tilting of the passenger-side mirror when reversing in Module 52 – Door Elect, Pass., Coding – 07, Long Coding Helper, setting both Bit 4 and Bit 2 in Byte 4 to 1.

Conclusion: Personalizing your D2 S8 Experience

These VCDS modifications offer a significant level of personalization for your D2 S8. Remember to proceed with caution and consult reputable sources before making any changes. Always document your original settings before implementing any modifications. Enjoy the enhanced driving experience these tweaks provide. While this guide covers numerous adjustments, further exploration with VCDS may reveal additional hidden features. Enjoy the journey of discovering and customizing your D2 S8.