This comprehensive guide provides a detailed Vcds Installation List for Audi S4 B8 models. Whether you’re looking to enhance performance, customize lighting, or access hidden features, this list offers a variety of modifications achievable through VCDS (VAG-COM) coding. This compilation gathers information from various online sources, offering a centralized resource for S4 owners.
Understanding VCDS and its Capabilities
VCDS, or VAG-COM, is a diagnostic software that allows you to access and modify the control modules in your Audi. This software opens up a world of customization options, enabling you to tweak settings beyond the factory defaults. This VCDS installation list focuses specifically on modifications tailored for the Audi S4 B8.
VCDS Installation List: A Comprehensive Overview
This list categorizes common VCDS mods for the S4 B8, providing concise instructions for each modification. Remember to back up your original coding before implementing any changes.
Lighting Modifications
- Disable Amber Corner Lights:
[09 – Cent. Elect.] [Coding - 07] > Long Coding Helper > Byte 10 Submodule 0 Bit 3 - Set to 0 - Disable Amber Side Markers:
[09 – Cent. Elect.] [Coding - 07] > Long Coding Helper > Byte 10 Submodule 0 Bit 3 - Set to 0 - Enable DRL via Various Lights:
[09 – Cent. Elect.] [Coding - 07] > Long Coding Helper > Byte 2 (Customize Bits 1-7 for specific lights) - Enable Rear Tail Lights with DRLs:
[09 – Cent. Elect.] [Coding - 07] > Long Coding Helper > Byte 2 Bit 7 - Set to 1 - Enable Euro Parking Lights:
[09 – Cent. Elect.] [Coding - 07] > Long Coding Helper > Byte 9 Bit 0 - Set to 1 - Adjust LED Brightness:
[09 – Cent. Elect.] [Security Access - 16] [Adaptation - 10] > Channel 3 (Set value between 5 and 100)
Convenience and Comfort Features
- Disable Seatbelt Chime:
[17 - Instruments] [Coding - 07] > Long Coding Helper > Byte 0 Bit 2-4 – Set to inactive - Enable Automatic Hill Hold Assist ‘lite’:
[03 - ABS brakes][Security Access - 16] [Coding – 07] > Long Coding Helper > Byte 1 Bit 6 set to 1 - Enable Remote Operation Windows and Sunroof:
[46 - Cent. Conv.] [Coding - 07] > [Long Coding Helper] Byte 2 Bit 2 - Set to 1 - Disable Key Warning (Keyless Models):
[46 – Central Conv.] [Coding - 07] > Long Coding Helper > Byte 9 Bit 7 set to 0
Display and Instrumentation Adjustments
- Enable Gauge Test/Needle Sweep:
[17 - Instruments] [Coding - 07] > Long Coding Helper > Byte 1 Bit 0 - Check the box - Enable Battery Meter:
[Hidden menu] [car] [cardevextdevicelist] [Battery] Enablethen[Hidden menu] [car] [carmenuoperation] [Battery] Set to 5or[56 - Radio] -> Adaption -> Channel 39, add 16 to your value - Adjust Consumption in DIS:
[17 - Instruments] [Adaptation - 10] > Channel 3 (Adjust value) - Enable Lap Timer:
[17 - Instruments] [Coding - 07] > Long Coding Helper > Byte 1 Bit 3 - Check the box
Other Notable Modifications
- Enable VIM on MMI:
[5F - Information Electr.] [Advanced ID - 1A] (Follow specific instructions for Security Access and Adaptation) - Enable TPMS: Requires specific ABS unit (1AT).
[Hidden menu] [car] [cardevicelist] [RDK] Enablethen follow instructions for module 03 and 17. - Set Audi Parking System – Switch OFF Speed:
[10 - Park/Steer Assist] [Adaptation - 10] -> Channel 23 Set to 20
This VCDS installation list provides a starting point for customizing your Audi S4 B8. Always consult reputable sources and forums for the most up-to-date information and procedures. Proceed with caution and remember that modifying your vehicle’s settings can void warranties if not done correctly. This list is for informational purposes only and does not constitute professional advice.
