VCDS Kolimer: Loader V9.2 Installation and Usage Guide

Vcds Kolimer, specifically Loader V9.2, is a popular solution for accessing and modifying vehicle control modules using Ross-Tech’s VCDS software. This guide provides comprehensive instructions for installing and using VCDS Kolimer Loader V9.2 with VCDS 22.10.0.

Installing VCDS Kolimer Loader V9.2

Before proceeding, ensure you have downloaded both VCDS 22.10.0 from the official Ross-Tech website and Kolimer’s Loader V9.2.

Step 1: Install VCDS 22.10.0

• Run the downloaded VCDS-Release-22.10.0-Installer.exe file.
• Follow the on-screen prompts of the installation wizard.
  • For Windows 8.1/10 users, select the “Fix Windows HID…” option.
  • On 64-bit Windows systems, choose “Install 32-bit EXE on 64-bit System”.
  • Important: Deselect “Create Start Menu Shortcut” and “Create a Desktop Shortcut”.
  • Crucial: Deselect “Run VCDS Release 22.10.0” at the end of the installation process. Do not launch VCDS directly.

Step 2: Prepare Kolimer’s Loader V9.2

• Extract the downloaded Loader_v9.2.zip file.
• Navigate to the extracted Loader_v9.2 folder.

Step 3: Integrate Loader with VCDS

• Copy the VCDSLoader.exe file from the Loader_v9.2 folder.
• Paste VCDSLoader.exe into the VCDS installation directory, typically C:Ross-TechVCDS.
• Create a desktop shortcut for VCDSLoader.exe for convenient access. Always launch VCDS using VCDSLoader.exe.

Testing and Flashing HEX-V2 Cables with VCDS Kolimer

Important Note: This process is only for HEX-V2 cables using the ATmega162 chip. Other cables are not supported.

Prerequisites:

• Connect your HEX-V2 cable to your vehicle’s OBD-II port and a 12V power source.

Step 1: Determine Bootloader Status

• Navigate to the VCDSLoader_v9.2 folder.
• Run VAGCOM_HWType.exe.
• Click “Read”. The tool will indicate if the bootloader is unlocked.

Step 2: Setting Language (If Applicable)

• Run VAGCOM_EEWriteLang.exe.
• Select your preferred language (English is usually the default).
• Click “WRITE”.

Step 3: Testing VCDS Functionality

• With the cable still connected to your vehicle and the 12V source, launch VCDSLoader.exe.
• In VCDSLoader.exe, click “Options”, ensure “USB” is selected, and then click “Test”.
• If the test is successful, click “Save”. You should now be able to connect to your vehicle and use VCDS for diagnostics and coding.

Conclusion

By following these steps, you can successfully install and utilize VCDS Kolimer Loader V9.2 to unlock the full potential of VCDS. Remember to always launch VCDS via VCDSLoader.exe and ensure your HEX-V2 cable uses the ATmega162 chip for compatibility. This guide provides a foundation for using VCDS with Kolimer’s loader, enabling you to diagnose and customize your vehicle effectively.