VCDS Lite USB Driver: Installation Guide for Windows 98/ME

This guide provides a step-by-step walkthrough for installing the Vcds Lite Usb Driver on Windows 98/ME operating systems. A successful installation is crucial for establishing communication between your VAG-COM compatible interface and your vehicle for diagnostics.

Download and Preparation

Before starting the installation, download the necessary files:

• VCDS Lite USB Driver: www.gendan.co.uk/download/vagusb98.exe
• VCDS Lite Software: www.ross-tech.com/vcds-lite/download/

Save both files in an easily accessible folder on your computer. Do not connect the USB interface to your PC yet.

Installing the VCDS Lite USB Driver

1. Run the Driver Installer: Locate the vagusb98.exe file and double-click it to start the installation process.

2. Connect the Interface: After the driver files are extracted to the “VAG USB Drivers” folder on your desktop, connect the USB interface to your computer. The “Add New Hardware Wizard” should automatically launch.

3. Locate the Driver: In the wizard, select “Search for the best driver for your device (Recommended)” and click “Next”.

4. Specify Driver Location: Choose “Specify a location:” and browse to the C:WindowsDesktopVAG USB Drivers folder. Click “Next”.

5. Complete Installation: Windows will locate and install the driver. Click “Finish” once the process is complete.

Note: Windows might repeat the installation process for a secondary component. Let it finish automatically.

Verify Driver Installation

1. Open Device Manager: Go to Start > Settings > Control Panel > System. If “System” isn’t visible, click “View all Control Panel options”. In the System Properties window, select the “Device Manager” tab.

2. Locate the Device: Expand “Ports (COM & LPT)”. The interface should be listed as “USB Serial Port (COMx)”. Note the COM port number (x) for configuring VCDS Lite.

Configuring VCDS Lite

1. Install VCDS Lite: Run the VCDS-Lite-x.x-Installer.exe file and follow the on-screen instructions.

2. Select COM Port: Open VCDS Lite, click “Options”, and choose the COM port number you noted earlier under “Select COM Port”.

3. Test Connection: Click “Test” to verify communication. If successful, click “Save”. Your VCDS Lite setup with the correct USB driver is now complete.

Conclusion

By following these steps, you can successfully install the VCDS Lite USB driver on Windows 98/ME and begin using the software for vehicle diagnostics. Ensuring the correct driver installation is paramount for effective communication between your computer and your car’s systems. Remember to always download software from official sources to guarantee safety and functionality.