VCDS MK7.5 Coding: Essential Tweaks for Your Volkswagen

The VCDS (VAG-COM Diagnostic System) offers a powerful way to customize your MK7.5 Volkswagen. With VCDS MK7.5, you can unlock hidden features and tailor your car’s settings to your preferences. This guide outlines some popular coding modifications for MK7.5 vehicles built after January 2018, leveraging updated module compatibility. Remember to always back up your original coding before making any changes. While these modifications have been tested, compatibility may vary depending on your specific vehicle configuration. Proceed with caution and consult reputable VCDS resources if you have any doubts.

Popular VCDS MK7.5 Coding Modifications

Lighting Enhancements

  • DRLs and Fog Lights as Coming/Leaving Home Lights: Enhance visibility when approaching or leaving your vehicle by activating your DRLs and fog lights as coming/leaving home lights. Navigate to Module 09 – Central Electrics, Adaptation – 10, enter security code 31347. Change “Aussenlicht_Uebergreifend-Coming Home Leuchten” to “Fog light” (default is “Low beam”).

  • Adjust License Plate Light Brightness: Fine-tune the brightness of your license plate lights. In Module 09 – Central Electrics, Adaptation – 10, with security code 31347, adjust “(6)-Leuchte25KZL HA59-Dimmwert AB 25” to your desired level (default is 127, a lower value reduces brightness. 60 is a recommended starting point).

  • Disable Red Side Marker LEDs in Taillights: Deactivate the small red LEDs on the side of the taillights. Access Module 09 – Central Electrics, enter security code 31347, then in Adaptations, change “(1)-Leuchte27NSL RC6-Lasttyp 27” to “not active” (default: “43-allgemeine LED”).

  • Disable Orange Front Headlight LED: Eliminate the amber side marker in the headlight assembly. In Module 09 – Central Electrics, use security code 31347 and modify “Leuchte26NSL LA72 – Lichtfunktion A 26” from “Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)” to “nicht aktiv”.

Convenience Features

  • Auto-Folding Mirrors on Reverse: Enable your side mirrors to automatically tilt down when reversing for improved visibility. Consult online forums and resources for detailed instructions on this modification as it involves more complex coding procedures.

  • Display Fan Level on Auto (Climatronic): Show the active fan speed even when the climate control is set to Auto. In Module 08 – Air Conditioning, Long Coding, Byte 11, enable Bit 6.

  • Remember Heated Seat Settings: Save your preferred heated seat settings between drives. In Module 08 – Auto HVAC, Adaptation, change “retention of the seat heater level driver” to active (default is 10 min.).

  • Track Refuel Quantity: Monitor the amount of fuel consumed since your last fill-up. Access Module 17 – Instruments, Long Coding, Byte 10, and enable Bit 4.

Window Operation Enhancements

  • Control Windows with Remote: Enable remote control functionality for your windows. In Module 09 – Central Electrics, Adaptation – 10, use security code 31347 and activate the following: “ZV Komfort-Comfort opening,” “ZV Komfort-Comfort closing,” “ZV Komfort-Funk Komfort oeffnen,” and “ZV Komfort-Funk Komfort schliessen.” Also, set “ZV Komfort-Menuesteurung Komfortbedienung einstellbar” to “adjustable.” Finally, configure your preferred settings in the head unit under Car – Setup – Open and Close – Conv. opening.

  • One-Touch Window Control with Door Handle: Roll your windows up or down by holding your hand in the door handle recess. In Module 09 – Central Electrics, Adaptation – 10, apply security code 31347 and change “Schlusse_Zugang-und Startberechtigung-Kessy Komfort oeffnen” to “active” (default: “not active”).

  • Prevent Window Roll-up Interruption: Disable the safety feature that stops windows from rolling up if the door is opened after the ignition is turned off. Go to Module 09 – Central Electrics, Adaptations, security code 31347 and set “ZV Komfort Freigabenachlauf FH bei Tueroeffnen Abbrechen” to “Not Active” (default: “Active”).

Conclusion

VCDS MK7.5 coding allows for a wide range of customization options, enhancing convenience, functionality, and the overall driving experience. Remember that coding modifications can impact your vehicle’s warranty. Always proceed with caution, back up your original coding, and consult reliable resources before implementing any changes. Enjoy exploring the possibilities of VCDS and personalizing your Volkswagen MK7.5.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *