Just got my hands on the Cen-Tech 98614 scan tool today, and initial impressions are positive. The software installation and driver setup were straightforward, loading without any hiccups. Connecting the unit via COM5 port was seamless, and the print function works perfectly right out of the box. My unit has a Burn Date of 11/25/09, Software Version V2.10, Hardware Version V1.50, and LIB Version V2.60. I’m running Vista Home Premium 64 bit, and everything is working smoothly so far.
After the initial setup, the real test was connecting the Cen-Tech 98614 to my vehicle and running diagnostics. The connection to the car was successful, and I was able to pull a range of diagnostic tests. The scan tool provided data across several modules, including “Control Module,” “O2 Monitor Test,” and “On-Board Mon. Test.” Under “Control Module,” the tool reported “$10 SAE J1850 VPW Vehicle Info. Not Supported Or Sto-red No Data,” along with messages indicating “No codes are stored in the module!” and “No pending codes are stored in the module!” It also stated “No Freeze Frame Data Stored!”
The “O2 Monitor Test” provided specific readings for “O2 Bank1 Sensor1,” showing “Rich-Lean Threshd(V)” and “Lean-Rich Threshd(V)” measurements. Interestingly, “O2 Bank1 Sensor2” was reported as “Not Supported Or Sto-red No Data.” The “On-Board Mon. Test” displayed a series of tests with IDs and MOD values, showing both “OK” and “Fail” statuses, alongside MEAS, MAX, and MIN values for various parameters.
One thing that stood out in the “Control Module” section was the recurring “$10” identifier next to various data points. If anyone has insights into what this “$10” designation signifies within the Cen-Tech 98614 scan tool output, I’d appreciate the information.
On the downside, the included manual for the Cen-Tech 98614 is quite basic and doesn’t offer much depth. However, for initial setup, connection, and basic OBD2 scanning, the Cen-Tech 98614 appears to be a functional tool at first glance. Further testing and deeper dives into the diagnostic data will be needed to fully evaluate its capabilities.
